ReflectiSHIELD
DENSIFIER
Silicate Technology
ReflectiSHEILD® Densifier can be used as a stand-alone treatment or as part of the Reflective Floor® Concrete Polishing System. ReflectiSHIELD is a blended formulation of non-film forming materials that have the properties of being a hardener, sealer, and dust proofer. It’s penetrating components chemically react with the concrete matrix creating additional calcium silicate hydrate (CSH) structures within the pores, while also filling near surface voids. When ReflectiSHIELD® is being used as part of the Reflective Floor® Concrete Polishing System, its chemical reactivity scale highly increases due to the reactive colloidal silica properties, creating an abundance of additional reactive sites to cross-link and bond with.
COVERAGE
Stand-Alone: 400-800 SF2 / Gal. (9.8–19.6 m2/L) *
Reflective Floor® System: 600-1,000 SF2 / Gal. (14.7–24.5 m2/L) *
READY TO USE
APPLICATIONS
1
VOC CONTENT
< 90 g/L
WATER REPELLANT
Consult Technical Data Sheet and SDS for further details regarding application instructions and safe use of this and all products.
// PACKAGING</span
5 Gallon Pail // 18.9 L
55 Gallon Drum // 208 L
275 Gallon Tote // 1,040 L
PROJECT CALCULATOR
1000WILL NEED: TOTAL GALLONS
ReflectiSHEILD® is an integral part of the process in creating a hard-solid mass of concrete that substantially increases the abrasion resistance, is dust-free, and forms a hydrophobic barrier that eliminates liquids or contaminants from penetrating the surface which further extends the service life and performance of the concrete floor.
ADVANTAGES
- No Rinse Formulation
- Use on New or Existing Concrete
- Extends Service Life & Performance of Concrete Floors
- Significantly Increases Abrasion Resistance
- Dust-Proof/-Free
- Increased Liquid & Stain Resistance
- Reduces Alkalinity Efflorescence
- VOC Compliant
- Does Not Contribute to ASR
- Formulated to Use on Tight or Porous Floors
- Cross-Links with All ReflectiFLOOR® Products
INDUSTRY COMPLIANCE
Compliant with the following National, State, and District for all US EPA AIM VOC Regulations:
- US Environmental Protection Agency (EPA)
- California Air Resources Board SCM Districts (CARB)
- South Coast Air Quality Management District(SCAQMD)
- Maricopa County, AZ
- Northeast Ozone Transport Commission
- Qualifies for LEED® Credits
- LBC Red List Compliant
- National Floor Safety Institute
- OSHA & ADA Non-Slip Requirements
ReflectiSHIELD®
meets or exceeds the following tests:
- ASTM C-1353: Abrasion Resistance
- ASTM C-779: Abrasion Resistance
- ASTM C-642: Density, Absorption, and Voids
- ASTM E-303: Surface Frictional Properties
- ASTM L-34: Depth of Penetration